The Roomba 900 series care is one of the important issues regarding the caring the mopping robot. There is various kind of house cleaning robot on the market. They need some special care for well being of it. The Roomba series of mopping robot is widely used apparatus that ensure a complete cleaning of the home floor.
For getting more smooth dust removing process, you can use the Roomba 900 series and ensure the Roomba 900 series care procedure. To do this task properly, you should follow some essential techniques that provide a very professional care of Roomba 900.
If you want to get expected performance some care procedures should be used and need some particular items regularly cleaned. However, ensuring Roomba 900 series care, you should follow the following steps:
Clean the Front Caster Wheel
The front caster wheel is the important parts of the Roomba 900 series. These wheels are clogged with various debris, hair, and rug. Such clogging may cause of floor damage. Some specific procedures need to be maintained to the front caster wheel. For following the procedure, you have to pull the front wheel firmly so that you can remove it.
• Refresh the inside wheel cavity by removing any debris.
• By using your hand, you need to revolve the wheel. Sometimes spinning is restricted. If so, remove the wheel from the housing. After that, push softly to remove its axle and clean the debris and hairs around it.
• After finishing the cleaning, reinstall the parts you removed. You should ensure that now the wheel is in the right place.
Keep Refresh the Side Brush
For cleaning the side brush, you need to remove the screw. Here you can use a coin or a small screwdriver so that you can easily remove the side brushes. After removing the side brushes, clean the dust from it as well as from the brush post. By reinstalling the brushes, now you can use them.
Refresh the Cliff Sensor
Cliff sensor is the vital part of the mopping robot and for Roomba 900 series care of, it should keep clean all the way. For this purpose, wipe up the cliff sensors by using a clean and dry cloth. In this way, you will find the cliff sensor completely refreshed.
Take Care of the Charging Contacts
The charging contacts of the mopping robot are the most sophisticated part. They should remain fully clean all the time. For keeping such, you should clean them at least once a week. You can wipe the charging contacts on the home base of the floor cleaning robot and the robot. For this purpose, wipe the contacts with a clean and dry cloth.
Keep Clean the iAdapt Localization Camera
The Roomba 900 series care will depend on the clean iAdapt localization camera. For this purpose, you should wipe the window that is on the robot’s upper surface. It should be cleaned with microfiber or soft cotton cloth. You can make the cloth a little wet with water the screen refreshing solution.
iAdapt Floor Tracking Sensor
On the iAdapt floor tracking sensor depends the Roomba 900 series care. Turn the Roomba over and use a clean and dry microfiber. For this purpose, you can also use a soft cotton cloth to wipe any debris. Such debris accumulated in the circle sensor opening on the right side of the bottom surface of the robot. You should not spray cleaning solution directly into sensor opening.